Baileigh PH-19VS, Operator'S Manual, Page: 17 / 39

15
15
10. The PH-19 is equipped with a quick release lever which aids in removing formed material
from in between the tooling. Especially helpful when using beading dies that requires starting
in the middle of a panel.
11. One of the most common tools used are the supplied Mini Thumbnail Shrink dies. Again, set
the most downward stroke to be equal to the material thickness.
12. Beading tools can be installed in the same fashion; but the tool clearance is more critical. It
must be slightly greater than the material thickness.
13. When beading or flanging, use of the guide fence will ensure perfectly straight forms. Setting
the guide fence is self-explanatory.
Adjustable
guide fence
Quick release
lever shown in the
“Down Position