Baileigh PH-19VS, Operator'S Manual, Page: 14 / 39

12
12
OPERATION
The PH-19 Reciprocating Hammer is a multi-stroke reciprocating machine, capable of many
different metal forming operations. In the next few steps, we will explain each mode of operation
as well as setting the tooling
RIGID MODE
1. Always unplug the machine before making stroke adjustments
2. Rigid mode is the primary function of this machine operating similar to a Pullmax machine.
3. The machine has two stroke settings, high stroke and low stroke. This is changed by turning
the eccentric adjuster under to front guard. The stroke is designed to either be hi or low and
NOT in between. To change, two wrenches are required.
CAUTION:
Always wear proper hearing and eye protection with side
shields, safety footwear, and leather gloves to protect from burrs and sharp edges.
Keep hands and fingers clear of the hammer dies.
When handling large heavy sheets make sure they are properly supported.
Lock nut, Shown
in the “HIGH
stroke position
Adjusting
Cam