Baileigh PH-19VS, Operator'S Manual, Page: 18 / 39

16
16
14. When beading, flanging, or forming the control can be either foot or the preset “on”,
whichever the user wants.
15. The max speed is 1750 BPM; you should only use max BPM if the stroke is set to the
minimum. Most forming applications in rigid mode work at 1000 BPM.
16. Another common tool in this mode is a joggle tool which can be simply made from 1/2"
(12.7mm) mild steel and installed in the universal tool holder.
17. Almost any profile tool can be made to fit in the universal tool holders, using 1/2” x 2” x 2”
(12.7 x 50.8 x 50.8mm) steel bar stock.
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
•
Material must be clean and dry. (without oil)
•
Material should have a smooth surface so it processes easily.
•
Dimensional properties of material must be consistent and not exceed the machine capacity
values.
• Chemical structure of material must be consistent.
• Buy certificated steel from the same vendor when possible.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.