23
23
Guard Operation
All guards must cover the belt unless that work station is in use.
Never remove the guards attached to the machine. Removing the guards can result in
serious injury.
All contact wheels can be covered by swinging guards. The operator must have all guards in
place and covering the belt when the machine is in operation. The guards may be swung to
the side when using that particular work station. Be sure to swing the guard back in position
when finished using the particular work station.
LUBRICATION AND MAINTENANCE
Check daily for any unsafe conditions and fix immediately.
Check that all nuts and bolts are properly tightened.
On a weekly basis clean the machine and the area around it.
Lubricate threaded components and sliding devices.
Apply rust inhibitive lubricant to all non-painted surfaces.
Note
: Proper maintenance can increase the life expectancy of your machine.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.
