21
21
Correct
Incorrect Inward
Incorrect Outward
OPERATION
Setting Head Position
The Baileigh BG-248-3 can be rotated on the motor shaft to any one of six positions to access
various work areas on the belt.
1. Lift knob (A) and rotate the grinding head on the
motor shaft to the desired position.
2. Release knob (A) and verify that the head is
locked into one of the six positions.
3. If desired for better access to the belt for grinding,
loosen the lock knob (B) and tilt the entire motor
and head assembly from the vertical position to
the horizontal position.
4. Tighten the lock knob (B). Failure to tighten the
lock knob could result in the tool becoming
unstable during operation and causing injury to the
operator and others.
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from burrs and sharp edges.
When handling large heavy material make sure they are properly supported.
A
B
