Baileigh Industrial IP-2509-HD-3, Operator'S Manual

Page: 37 / 80

34
34
PARAMETER
Parameter Display Description Default Remarks
0 CHAnGE Load datum value 0
1 dir Select counting direction (+ / -) -dir
2 OriGin Load origin 0.00mm
3 OffS- Set tool diameter 0.00mm
4 POSdir Positioning mode
─ ─ ┤├ ─ ─
5 SPEEd One or two speed positioning 1sp
9 LoAd 0 Load tool diameter 0.00
10 Lo-End - Software limit -50.00mm
11 Hi-End + Software limit 1000.00m m
15 InPOS Positioning output time 0.15ms
17 toLL Tolerance 0.30mm
19 FAuLt Low speed limit 55
20 LinCOr Linear correction 1.00000
30 PASS Parameter lock ----
33 SOurCE Software version
55 PrOG- Fast program
90 rES Resolution 0.01mm
99 GO.... Sensor calibration
ENTER PARAMETER SETTINGS MODE
With this function, you can select each parameter to be locked or unlocked. When a parameter
is locked, the user can see the value, but cannot change it.
1. Select single mode LED lamp off
2. Press .
Display