19
19
CONTROLS IDENTIFICATION
A. Emergency Stop Button:
Stops all functions of machine, but the planer still has power. To
reset, rotate switch clockwise until the button pops out.
B. Main Motor:
Starts rotation of Cutterhead. Will not work if the
“Emergency Stop” switch is
engaged, or hood is open.
C. Digital Thickness Controls:
Displays and controls table position, units, etc..
D. Table Up:
Raises the table.
Note:
Table will contact the upper limit switch at about 5/8
”. You can continue to
raise the table manually by using the handwheel.
E. Table Down:
Lowers the table.
Note:
Table will contact the lower limit switch at about 8-5/8
”. You can continue to
lower the table manually by using the handwheel.
A
B
C
D
E
Summary of Contents for IP-2509-HD-3
