Baileigh Industrial BSVT-18P, Operator'S Manual

Page: 20 / 56

17
17
ASSEMBLY AND SET UP
Stands
1. Position the saw in the desired location.
2. Safely raise the machine high enough to position
the end stands onto the frame.
3. Secure using the M12 hex head bolts.
Manual Feed Handwheel
1. Remove the tape securing the key to the shaft and
install the handwheel onto the shaft over the key.
2. Secure the handwheel to the shaft by tightening the
set screw.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.