8
Atom OD15 Mounting
Bracket
1 each
You will need standard tools, Ethernet cable, ground wire, and RJ-45 connectors for installing and
connecting the outdoor unit (Table 2).
Table 2: Materials
Item
Description
Ethernet Cable
Outdoor shield CAT5E, shorter than 330 feet
Ground Wire
16mm
2
yellow-green wire
2.2. LEDs & Interfaces
On the low-gain UE the LEDs are on the side of the unit, and the connection interfaces are on the bottom of
the unit. On the high-gain UE both the LEDs and the interfaces are on the side of the unit. Refer to
错误
!
未
找到引用源。
for a description of the LEDs and
错误
!
未找到引用源。
for a description of the interfaces.
Table 3: LEDs
LEDs vary by model – not all models will have all of the LEDs listed below.
Identity
Description
Color
Status
Description
L&S
LTE network and USIM
status
Blue
Off
The UE is not connected to the network
Steady On
The UE is connected to the LTE network
PWR
Power status
Yellow
Off
No power supply to the UE
Steady On
Power to the UE is on
LTE Signal
L/M/H 3 bars to indicate
wireless connection
status. The more bars,
the stronger the signal
between the UE and a
network cell (eNB).
Green
All Off
The signal is too weak for the UE to connect to
the network
Steady On
Bars will light steadily according to signal
strength
Blinking
The UE is scanning the network
The UE is authenticating with the network
The UE is getting an IP address from the
network
Table 4: Interfaces
Interfaces vary by model – not all models will have all of the interfaces listed below.
Interfaces
Description
PoE
Power over Ethernet (PoE) power adaptor
