23
2.8. Security Menu
2.8.1. IP Filtering
When using a firewall server in the local network, invoke this setting to enable or disable the firewall for
this CPE (Figure 50).
Figure 30: Firewall Basic Settings
When enable IP/Port Filtering, then the IP/Port Filter can be set.
Figure 31: IP / Port Filtering
Settings:
(1)
IP/Port Filtering Mode: Blacklist, White list
(2)
IP/Port Filtering Log Dropped: enable / disable
(3)
Destination IP Address: the destination IP Address of the filter
(4)
Source IP Address: the source IP Address of the filter
(5)
Protocol: TCP, UDP, TCP/UDP, ICMP, ALL
(6)
Destination Port Range: the range of port
(7)
Source Port Range: the range of port
(8)
Schedule Index: Select box, if can be schedule by APPs
(9)
Remarks
2.8.2. IPv6 Filtering
When enable IP/Port Filtering, then the IP/Port Filter can be set.
