12
Insert the clamping ring(s) to each of the two display clamps and mount
them onto the handlebar. Use an internal hexagonal wrench to fasten the
left and right clamps onto the handlebar.
B. display clamp
C. hexagon socket head cap
screws M4*8
Adjust the angle of the display so that you can easily see the display
screen when riding. After the angle has been adjusted, tighten the screws
to the specified torque.
Tightening torque: 1N.m
Tool:
Summary of Contents for MM G31.250
Page 9: ...9...
Page 50: ...50 Fault Alert Interface...
