3
4. Dongle connection
Unpackage your dongle and screw it to the WIFI/RS232 port of your inverter.
5. IP address / networking
Connect to the AP network with your device. This can be done by viewing the
available Wi-Fi networks on your device and selecting the
network beginning
"
AP
"
from the list. Once you have selected the AP network you will be asked
for the network password. The password can be found on the dongle or on the
box signified by “PWD”. Once connected the network will state “connected (no
internet access)” as seen below.
After connecting to the AP network go to your browser and type 10.10.100.254
into your URL browser, you should get the following
popup
.
