background image

5. LCD Display Icons

5.1 Main Screen

The LCD is touchscreen, the below screen shows the overall information of 

the inverter.

1.

The icon in the center of the home screen indicates that the system is in Normal

operation. If it displays "comm./F01~F64", this means the inverter has

communication errors or other errors, the error message will be displayed under this

icon (F01-F64 errors, detailed error info can be viewed in the System Alarms menu).

2.

At the top of the screen is the time & date.

3.

System Setup Icon, by pressing this button you will enter into the system setup

screen which includes Basic Setup, Battery Setup, Grid Setup, System Work Mode,

Generator port use, Advanced functions and Li-Batt info.

4.

The main screen will also show info including Solar, Grid, Load and Battery. It also

displays the energy flow direction by arrow. When the power is approximate to high

level, the colour on the panels will change from green to red so the system info

shows vividly on the main screen.

·

PV power and Load power always keep positive.

·

Grid power negative means export to grid, positive means

import from grid.

·

Battery power negative means charge, positive means

discharge.

4. OPERATION

4.1 Power ON/OFF

Once the unit has been correctly installed and the batteries are connected, simply 

press the On/Off button (located on the underside of the inverter) to turn the unit on. 

When a system without a battery is connected, and connected with either PV or grid, 

and the ON/OFF button is switched off, the LCD will still light up (Display will show 

OFF), in this setup, press the ON/OFF button and select no battery and the system can 

still be operated.

The operation and display panel, shown in the below chart, is on the front panel of the 

inverter. It includes four LED indicators, four function keys and a touchscreen LCD 

display, indicating the operating status and input/output power information.

Chart 4-1 LED indicators

LED Indicator

DC

AC

Normal

Alarm

Green led solid light
Green led solid light
Green led solid light
Red led solid light

PV Connection normal
Grid Connection normal
Inverter operating normal
Malfunction or warning

Messages

Chart 4-2 Function Buttons

Function Key

Esc

Up

Down

Enter

Description

To exit settings mode

To go to previous selection

To go to next selection

To confirm the selection

25%

05/28/2019  15:34:40

8.30

KW

-2.00

KW

-3.00

KW

3.00

KW

0

12

0

8

0

8

0

8

ON

- 17 -

- 18 -

Summary of Contents for BPE-HI-3.6K






























Reviews: