Page 25
4-11
Installation & Operation Manual
Entering Your Personal Identification Number (PIN)
If your system has been set up with PIN security, you will need to enter a PIN to access programming functions. There are
three possible access levels, each with its own unique PIN: User, Service and Administration. Your system administrator will
provide you with the appropriate PIN.
Note: All PINs are factory set to 00000. At this setting, you will not be required to enter a PIN. If the system
administrator has not set the PIN, pressing [E] from the Start Screen opens the Main Menu.
If you forget or misplace your PIN, call Badger Meter Customer Service to get a master password. When you call,
have the security code that appears in the upper right corner of the PIN Request display.
Follow these steps to enter your PIN in the M-2000:
1.
At the
Main Menu
, press
[E]
. The
PIN Request
display opens.
PIN REQUEST 12345
Please enter
pin #: 00000
CHG:+,- NEXT:E
Security Code
2.
Press
[+]
to increment the numeral.
3.
Press
[E]
to move the cursor to the next digit.
4.
Repeat the steps to set each of the five digits to match your PIN.
5.
Press
[E].
If you entered a valid PIN, the
Main Menu
opens inidicating your level of access.
If you entered the wrong PIN, you will see the following display:
MENU ACCESS
DENIED
•
Press
[E]
to return to the
PIN Request
display.
•
Repeat Steps 1 through 5.
Note: Be sure to log off when you have completed work with the M-2000. Otherwise, there will be a five-minute
delay between your last activity and the time when the M-2000 will automatically log you off.
