9
Press 3 times „Total“ and 3
times „Reset“ to access the
programmation mode.
Measuring unit “L” (liter) is
flashing and can be changed
in L, GAL, QT or PT when
pressing “Reset”. Press “Total”
to confirm the new measuring
unit.
4. Programmation of LM OG (CND)
After the sleeping mode,
please press „Total“ to show
the „normal“ display mode.
Press both buttons
simultaneously to save the
programmation.
The meter then goes to the
sleeping mode.
Sleeping mode
Press „Reset“ during 3
seconds and the register
displays the check sum.
The fifth figure can now be
changed.
The fourth figure can now be
chanced.
To access the next figure,
press “Total”.
Press “Total” one time to
change the k-factor.
The figure to be changed
is flashing and can be
modified with “Reset”.
To change the next figure,
press “Total”.
Press „Total“ one time to
switch on the meter.
The second figure can now
be chanced.
To access the next figure,
press “Total”.
The third figure can now be
chanced.
To access the next figure,
press “Total”.
„Total“ resettable
„Total“ not resettable
Measuring unit
