Badger Meter HR-E LCD 4-20, Programmer'S Manual

Page: 5 / 24

Introduction
INTRODUCTION
This manual has instructions for programming HR-E LCD and HR-E LCD 4-20 high resolution (HR) encoders . Instructions for
installing the Programmer software can be found in the "Appendix" on page 19 .
Audience and Purpose
This manual is intended to be used by utilities for programming Badger Meter high resolution encoders .
SYSTEM REQUIREMENTS
A computer with a Windows® 7 (or newer) operating system is required for programming the HR LCD encoders .
PARTS LIST
The following parts are necessary for programming HR LCD encoders .
67660-001 Programming kit (CD)
Kit includes IR head bracket and
programmer software (CD)
68468-001 Programming kit (USB)
Kit includes IR head bracket, programmer software (USB)
and programming cable (USB)
67451-001
IR head bracket
( Included in the 67660-001, 68468-001 kits)
67572-009
HR-E LCD encoder programmer software (CD)
(
Included
in the 67660-001 kit)
Available on CD
67572-012
HR-E LCD encoder programmer software (USB)
( Included in the 68468-001 kit)
Available on USB flash drive
64436-042
IR programming and data profile cable
(
Required
, but
not included
in the
67660-001 kit)
64436-029
Serial-to-USB adapter
(Optional)
OTEE: N
Software version 2 .0 .x is required for programming the HR-E LCD 4-20 encoder .
Page 5 May 2018 ENC-PM-02040-EN-03