Programmer Parameters
Rate of Flow Time Field
The
Rate of Flow Time
field displays the time unit set for the rate of flow . The factory-programmed default is
Per Minute
.
Click the drop-down menu to the right of the data field to select a Rate of Flow Time . The options are seconds, minutes or
hours as shown in
Figure 23: Rate of Flow Time
Deactivate 6-Digit Display
The
Deactivate 6-digit display
field can be used to remove the 6-digit consumption display from the encoder automatic
display . See the
High Resolution LCD Encoders User Manual
, available at
,
for additional information .
Click the box to the left of the field to select it . When the box is checked, the display automatically toggles between the 9-digit
consumption display, the rate of flow and the meter model .
Figure 24: Deactivate 6-digit display
Page 15
May 2018
ENC-PM-02040-EN-03
Summary of Contents for HR-E LCD 4-20
Page 2: ...High Resolution LCD Encoder Programmer Page ii May 2018 ENC PM 02040 EN 03...
Page 4: ...High Resolution LCD Encoder Programmer Page iv May 2018 ENC PM 02040 EN 03...
Page 19: ...Appendix APPENDIX Page 19 May 2018 ENC PM 02040 EN 03...
Page 23: ...Programmer Manual INTENTIONAL BLANK PAGE Page 23 May 2018 ENC PM 02040 EN 03...
