Badger Meter HR-E LCD 4-20, Programmer'S Manual

Page: 13 / 24

Programmer Parameters
Billing Units Field
The Billing Units field ( Figure 19 ) displays the default units for which the customer is billed, and is indicated by dashed lines
above and below the totalizer reading . The default is based on the Unit of Measure selected:
Unit of Measure Default Billing Unit
Gallons, liters, imperial gallons 1000
Cubic feet 100
Cubic meters 1
Click the drop-down menu to the right of the data field to select a Billing Units value . If you do not want the dashed lines to
display, select “0“ (zero) as the Billing Units value .
Figure 19: Billing Units
Digits from Encoder Field
The Digits from Encoder field ( Figure 20 ) displays the number of digits the encoder is programmed to send to the endpoint .
These options include 4, 5, 6, 7*, 8* and 9 digits . Readings reported from an encoder programmed to 4, 5, 6, 7 and 8 digits are
the left-most significant digits . Changing this value affects the Encoder Output field .
Click the drop-down menu to the right of the data field to select a different encoder output resolution .
* The 7- and 8-digit options apply to encoders with version 14 or later .
Figure 20: Encoder digits
MPORTANT I
Be very careful with the Digits from Encoder feature! Changes will affect the reading resolution sent to the endpoint and in your
reading data management system.
Page 13 May 2018 ENC-PM-02040-EN-03