16
Depending on the backside variation you want to produce, an additional final step might be
necessary. Concerning the 25 mm button with D-shaped pin for example, you have to put the
D-shaped pin into the ring backside by hand yet. Concerning the 59 mm button with clip you
manually have to put the clip into the ring backside. Concerning the 25 mm earring button, finger
ring button or button with metal insert for sewing you have to glue the delivered parts into the
backside with the help of the self-adhesive foam pad. Please do not add before the button is
ready produced.
step
6.
Take the two lower stamps out of the swivelling plate.
step
1.
how to exchange the stamp set
The stamps of our badge maker type 900 Flexi are exchangeable. With only a few movements and
without any tool needed, you can easily switch to another button size.
this is how it goes:
D-shaped pin
clip
Flexi-holding
