17
Now the upper stamp has to be separated from the Flexi-holding. Therefor, push the upper stamp
down with your thumbs until it gets loose –
aND
at the same time push the Flexi-holder upwards
with your forefingers.
step
2.
attention – read this step completely before trying!
step
3.
Now you put in the other upper stamp.
Put the badge maker in front of you so that the ground
plate is positioned vertically. Turn the swivelling plate into
a horizontal position, so that you can correctly read the
word „Flexi”.
Take the upper stamp. It consists of two parts, the upper
part and the lower part with the two split pins. Before you
put the upper stamp into the Flexi-holding you have to
bring these two parts into the right position:
The upper part is movable. Turn it until the two bolts in it
are exactly above the holes you find in the lower part. Put
these two parts of the upper stamp together, so that the
bolts disappear in these holes.
clip
bolt
Flexi-holding
