Bad Boy 4035H 2021, Operator'S Manual

Page: 125 / 128

8
-
6
BAD BOY TRACTOR
10. Get onto the tractor and start the
engine.
11. Check if the instrument pan-
el and all parts operate correct-
ly while running the engine for a
few minutes.
12. Drive the tractor outside and
check if it is operating properly.
Park the tractor outside and idle
the engine for at least 5 minutes.
Stop the engine and visually in-
spect the tractor. Check if there
is leakage.
13. Start the engine, release the
parking brake, and check the
brake condition by depressing
the brake pedal. Adjust the free
play of the brake pedals if nec-
essary.
14. Stop the engine and check for
leakage. Repair any part as re-
quired.
•
When operating the tractor in
an enclosed area, ventilate the
area to release exhaust gas
to the outside. Exhaust gas is
colorless and not visible, but
is harmful.
WARNING
USING TRACTOR AFTER
LONG-TERM STORAGE
Keep the following instructions when
using the tractor after its long-term
storage.
1. Perform the inspection procedures
before operation.
2. To prolong the life and to enhance
the performance of the engine,
idle the engine for about 30 min-
utes before starting work.
3. Check the tire air pressure and in-
flate the tires if they are low.
4. Install a fully charged battery.
Check that the battery is fully
charged before installing it.
5. Check the fan belt tension.
6. Check all fluid levels. (Engine oil,
transmission/hydraulic oil, and en-
gine coolant)
7. Remove grease from the exposed
cylinder rod.
8. Apply grease to the lubrication
points.
9. Remove the cover from the ex -
haust pipe.
4025h_4035h.indb 6 4025h_4035h.indb 6 2020-09-18 오후 6:23:24 2020-09-18 오후 6:23:24