Bad Boy 4035H 2021 Operator'S Manual Download

Page: 43 / 128

BAD BOY TRACTOR

CAUTIONS FOR DECAL MAINTENANCE

Safety decals are attached to the

tractor for safe operation. Make sure

to follow the instruction on the decals

as well as the following instruction:

CAUTION

•

Keep the decals clean and intact.

If any decal is dirty, wash it with

soap and dry with a soft cloth.

•

Never use a solvent such a thin-

ner or acetone, since it can ruin

the decals.

•

Do not spray high-pressure wa-

ter directly onto the decal. The

decal may fall off the tractor.

IMPORTANT

•

If a decal is damaged or lost,

contact your local BAD BOY

dealer immediately to install a

new decal.

•

Make sure to attach the decal

in the correct position cleanly

without bubbles after cleaning

its mounting surface.

•

If a decal is attached to a com-

ponent to be replaced, replace

the decal as well.

4025h_4035h.indb 36

2020-09-18 오후 6:23:12

Summary of Contents for 4035H 2021

































































































































Search results

Summary of Contents for 4035H 2021

Reviews:

Related manuals for 4035H 2021

Brands by name

Popular brands

Bad Boy 4035H 2021, Operator'S Manual

Search results

Summary of Contents for 4035H 2021

Reviews:

Related manuals for 4035H 2021

Brands by name

Popular brands