Bad Boy 4035H 2021 Operator'S Manual Download

Page: 77 / 128

BAD BOY TRACTOR

1. Adjust the seat properly and

fasten the seat belt. Adjust the

seat to easily reach the pedal and

the steering wheel.
If the seat belt is worn across the

abdomen or waist, not the hips, an

injury can occur in case of an acci-

dent or impact.

2. Check if both brake pedals are in-

terlocked.

CAUTION

If the tractor is out of control, it

can cause a personal injury or

even death. Keep the following

instructions on a road:

•

Interlock the both brake ped-

als.

•

Use the foot throttle pedal.

•

Reduce the speed while driv-

ing on a slippery, or gravel

road.

•

Attach the proper weight.

•

When reducing the speed, use

the brake gently and carefully.

IMPORTANT

•

Don’t put a foot on the brake

pedal unnecessarily during

driving. Such action can re-

duce the brake's service life.

(1) Brake pedal

HOW TO DRIVE

(1) Safety belt

(2) Seat sliding lever

4025h_4035h.indb 8

2020-09-18 오후 6:23:17

Summary of Contents for 4035H 2021

































































































































Search results

Summary of Contents for 4035H 2021

Reviews:

Related manuals for 4035H 2021

Brands by name

Popular brands

Bad Boy 4035H 2021, Operator'S Manual

Search results

Summary of Contents for 4035H 2021

Reviews:

Related manuals for 4035H 2021

Brands by name

Popular brands