Bad Boy 4035H 2021, Operator'S Manual

Page: 117 / 128

7
-
6
BAD BOY TRACTOR
Symptom Inspection item Action
1. The implement does not be lifted.

Is the hydraulic flow control dial in the close
position?

Adjust the hydraulic flow control dial.

Is the transmission oil level low?

Refill the transmission oil.

Is the air taken in the fluid suction system?

Tighten the filter or connection parts. Re -
place the pipe or O-ring if damaged.

Is the oil filter clogged?

Clean or replace it.

Is the Selective control valve lever in the de-
tent position?

Put the Selective control valve lever in
the neutral position.

Is the hydraulic pump defective?

Contact the dealer for repair.

Is the cylinder damaged?

Contact the dealer for repair.
2. The implement does not be low-
ered.

Is the hydraulic flow control dial in the close
position?

Adjust the hydraulic flow control dial.

Is the position control lever on the lowest po-
sition?

Move the position control lever.

The implement cannot be lowered even
though the position control lever is placed in
the lowest position.

Contact the dealer for repair.
TROUBLESHOOTING - HYDRAULIC SYSTEM
4025h_4035h.indb 6 4025h_4035h.indb 6 2020-09-18 오후 6:23:24 2020-09-18 오후 6:23:24