3
CONCRETE FOUNDATION
If you choose to install your kit on a concrete slab refer to the diagram below.
A
B
C
4" (10,2 cm)
3-1/2"
(8,9 cm)
DOO
R
Treated Sill Plate
Caulk between sill plate
and concrete.
A
B
C
Actual Floor Size
Building Size
• A treated 2 x 4" (5,1 x 10,2 cm) sill plate is required when installing your shed on concrete.
Hint: Use treated lumber in your kit or
purchase full length treated lumber.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2 x 4" (5,1 x 10,2 cm) sill plates to slab using approved concrete anchors
(fasteners not included)
.
• Check local code for concrete foundation requirements.
96" (243,8 cm)
85-5/8" (217,5 cm)
8'x 7'-8-5/8" (243,8 x 235,3 cm)
8'x 8' (243,8 x 243,8 cm)
92-5/8" (235,3 cm)
2 x 4 x 8' (5,1 x 10,2 x 243,8 cm)
Requires:
x4
MUST be treated lumber.
Caulk
x1
Allow new concrete slabs to cure for at least seven (7) days.
NOTES
Slab must be flush at the front of the shed for door opening clearance.
Any over-sized slab must have the excess at the sides or back of shed.
Flush
