36
ROOF PANELS
3
Install the
48" x 96"
panel with a 1/2"
measurement on the gable trim
(Fig A)
and
the panel flush at the peak
(Fig. B)
.
Secure panel with (2) 2" nails in
the corners.
2
1/2"
(1,3 cm)
Gable
Trim
2" (5,1 cm)
PARTS REQUIRED:
x8
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
x2
Flush at peak.
Fig. B
Flush at peak.
Fig. B
Fig. A
Roof panels may cause serious injury until securely fastened.
Install all roof panels with the rough side facing up (painted grid lines side).
1
BEGIN
Before installing
48" x 96"
roof panel,
measure down 48" from rafter peak
and mark 2 rafters, as shown.
Place (1) 2" nail at each mark.
(Nails will support panel in position.)
Two Nails
Two Nails
48"
(121,9 cm)
Move to the opposite end.
Using the long edge of the panel as
a lever, move the panel side-to-side
until the top corner is flush at the
peak
(Fig. B)
.
Move the gable unit until it is 1/2"
from the roof panel
(Fig. C)
.
Secure panel with (2) 2" nails
in the corners.
Move Gable
1/2"
(1,3 cm)
Gable
Trim
Fig. D
2"
(5,1 cm)
Nails
