![background image](http://html1.mh-extra.com/html/backyard-products/gable/gable_assembly-manual_465504057.webp)
55
ROOF PANELS
Move to the opposite end. Using the long
edge of the panel as a lever move the
panel side-to-side until the top corner is
flush to the peak
(Fig. C)
and there is 1/8"
measurement to the gable trim
(Fig. D)
.
You may need to move your back wall to
get the 1/8" measurement.
Secure panel with 2" nails in the corners.
2
You must square the roof by attaching (1) panel fist. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury
until securely fastened.
Install (1)
48 x 96"
panel with the rough
side up (painted-grid lines side) with a 1/8"
measurement on the rafter
(Fig A)
and the
panel flush at the peak
(Fig. B)
.
Secure panel with 2" nails
in the corners.
1
BEGIN
(2) Nails
48"
(122 cm)
1/8"
(3 mm)
Fig. A
Flush at peak.
Fig. B
1/8"
(3 mm)
Gable
Trim
Fig. D
Flush at peak.
Fig. C
DOOR
2" (5 cm)
PARTS REQUIRED:
x 4
7/16 x 48 x 96"
(1,1 x 122 x 244 cm)
x2