U
SING
Y
OUR
M
EAT
G
RINDER
TO
GRIND
MEAT
1. Place the head tightly into the motor base opening. Holding the head with one
hand, place the locking knob in the hole on the side of the motor base and
tighten it clockwise.
2. Place the feed screw into the head; long end first, by turning the feed screw
slightly until it is set into the motor base.
3. Place the cutting blade onto the feed screw shaft with the sharp blades facing
out away from the front of the appliance.
Note:
If it is not fitted properly, the
meat will not be ground.
4. Place the desired cutting plate next to the sharp side of the cutting blade by
fitting the tabs into the slots.
5. Screw the screw cap clockwise until tight. Do not over tighten.
6. Place the hopper plate on the head and fix into position. Cut all the food into
pieces so that they fit easily into the hopper opening.
5
