The status LED displays the status of the PDU. Possible states
are:
Colour
Light
Status
Green
Continuously green
All measurements are OK and the
status of the individual loads and
sensors are OK
Orange
Continuously orange
The measurement monitor is
issuing a warning (based on all the
measurements of the master
PDUs and sensors)
Red
Continuously red
The measurement monitor is
issuing an alarm (based on all the
measurements of the master
PDUs and sensors) or the signal
to a slave PDU or a sensor has
been interrupted
Yellow
Continuously yellow
PDU is starting up
White
Continuously white
Light signal to release the pressed
key (during Factory Reset)
Purple
500 ms off, 500 ms purple
An update of a PDU is being car-
ried out
Purple, red
500 ms off, 500 ms purple, 500 ms off, 500 ms
red
An error occurred during the
update of a PDU
Master PDU status LED
Fig. 8: Status LED
Overview
Displays and controls
25.09.2015
BlueNet PDU BN3000/3500/5000/7000/7500
9
