BabyOno 051, User Manual, Page: 6 / 24

ASSEMBLY
1.
Place the silicon insert (3) inside the breast pump body (4).
2. Place the gasket (5) into the neck with the body thread (4).
3. Place vertically the part with the motor (2) of the body (4) and fix it on the body.
4. Screw the bottle (6) clockwise onto the body (4).
Before use please make sure that all parts are correctly assembled.
USE OF BATTERIES
1.
Take off the battery cover.
2. Use two 1.5V batteries (alkaline batteries are required).
3. Battery installation: place the batteries in the battery compartment and make sure that the battery poles '+'
and ' -' are placed correctly, as indicated inside the battery compartment.
4. Close the battery compartment by pressing the cover.
5. If the product is not used for a certain period, take the batteries out.
6. If you are using the power supply adapter, place the plug into the socket (DC 3V).
(Attention: use only the original power supply adapter. Other adapters may cause problems and be dangerous
while using them. DO NOT use other adapters.)
INSTRUCTIONS FOR USE
*To obtain the best possible result, we suggest using the power supply adapter.
3. Place your breast gently in
the body in such a way that
the nipple is inside the insert.
3
1. Adjust the silicon insert
to the breast pump body.
2. Screw the bottle onto the
body.
1
2
4. Pumping:
Move the button to the ON
position (permanent suction
f u n c t i o n ) a n d s t a r t
expressing milk.
4
15
12
14
13
16
SUCTION RELEASE BUTTON (PUSH)
14
SUCTION POWER ADJUSTER
13
OFF
12
ON
12
Battery cover Cleaning ending Suction power adjuster
Suction unit and battery compartment Silicon teat for milk and other liquids 0-6 months Suction release button
Silicon insert with massaging flakes Bottle lid AC/DC socket
Breast pump body Bottle cap Power supply adapter
Gasket Support
125 ml bottle On/off button
15
16
5.