28
29
C.
Fit either harness buckle tongue into
the harness buckle followed by the
other tongue until a click is heard.
Should the second tongue not
insert then press the red button and
reinsert the tongues. Ensure secure
engagement by pulling harness
straps.
D.
Ensure all slack is removed from the harness lap strap by
pulling shoulder straps
E.
Pull the harness adjuster strap to remove slack so the
harness fits the child with minimal slack (see previous
page). Shoulder straps must fit firmly to the child. A loose
harness could result in serious injury in a crash. Do not
over tighten.
Do not use restraint if straps do not tighten, immediately
contact your local authorised service agent for repair.
TO REMOVE CHILD
Press red button on harness buckle then both harness tongues will be released. Lift the shoulder straps
from the child’s shoulders and lift the child out of the seat. You may lengthen the shoulder straps if you
wish but don't forget to retighten when you next use the restraint.
Pull to remove slack from
harness lap strap
Shoulder
Strap
Harness
Lap strap
Crotch
Straps
Click
C
E
D
A LOOSE HARNESS IS DANGEROUS
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR
HOW TO SETUP
HOW TO SETUP
PLACING CHILD IN THE RESTRAINT
A.
Lengthen harness by lifting the adjuster lever while pulling
on both shoulder straps until the harness will accommodate
the child.
B.
Place child in the restraint and feed each arm
through shoulder straps. Pull harness buckle
up between child’s legs.
Check the headrest sides are just above
the shoulders and not touching the child's
shoulders. If the shoulders are touching the
headrest it is time to adjust the headrest and
harness up to the next position.
Pull Harness strap
to tighten the
shoulder straps
Lift flap and
press Harness
adjuster lever.
Pull to
lengthen
A
B
