38
39
If your restraint has been involved in a severe crash, you should destroy the restraint even if no damage
is obvious. Some insurance companies offer vehicle insurance which covers or partially covers the
replacement of your child restraint. Contact your insurance company for further details.
Your insurance company may require you to keep the child restraint for assessment,
but do not use the
child restraint after a severe crash.
IN CASE OF ACCIDENT
INSTALLATION OF CAR'S UPPER ANCHOR FITTING
CHILD RESTRAINTS MUST NOT BE ATTACHED TO
UNSOUND METAL OR TO WOOD, OR SYNTHETIC
STRUCTURES. WHEN DRILLING 9 MM HOLE DO NOT
DRILL THROUGH FUEL LINES, FUEL TANKS, ELECTRICAL
WIRING, OR RADIO SPEAKERS.
WEBBING STRAPS MUST BE PROTECTED FROM SHARP
CORNERS AND EDGES. THE ANCHOR FITTING MUST BE
USED ONLY AS DESCRIBED ABOVE. IT MUST NOT BE
HOOKED ONTO ANY OTHER OBJECT.
ONLY USE A 5/16 UNC GRADE 5 BOLT. IF THE BOLT IS NOT THE
CORRECT LENGTH THE CAR MANUFACTURER’S HAND BOOK
CAN PROVIDE ADVICE ON THE CORRECT LENGTH BOLT.
Note: Marking on the top
of a Grade 5 Bolt.
Front of Vehicle
Centre line of
seating position
Fig.3.
200mm
min.
VEHICLE INSTALLATION ACCESSORIES
(Available from retailers of Babylove products)
EXTRA ANCHOR KITS:
Are available if using the restraint in additional vehicles.
Re-order number: K402
EXTENSION STRAPS:
May be required for vehicles without a fixed parcel shelf.
Re-order number: K304 (length 300mm)
or K305 (length 600mm).
GATED 3-BAR SLIDE:
For converting lap-sash seat belt to lap belt for the Child Harness (supplied with the
Child Harness) Also to obtain a better fit to the car where the seatbelt may loosen although most cars will
not need this.
Re-order number: K403.
