Baby Trend BC36, Instruction Manual

Page: 3 / 16

Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
4
ASSEMBLY WARNING
3
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING:
Prevent serious injury or death:
WARNING:
NEVER leave child unattended.
WARNING:
ALWAYS use restraint system.
WARNING:
NEVER use for a child able to sit up
unassisted.
FALL HAZARD:
Child’s activity may move
product. Use only on floor. Never use on any elevated
surface.
SUFFOCATION HAZARD:
Never use on a
soft surface (bed, sofa, cushion), as seat may tip over and
cause suffocation.
• NEVER allow your product to be used as a toy.
• Toy bar is NOT a Carry Handle.
• Never use toy bar to lift or carry product.
• NEVER move the product with the child inside.
• Product is NOT intended for use as a carrier.
• Product is NOT intended for use as a sleeper or for prolonged periods of use.
• NEVER place a child under 5 lbs. (2.26 kg) or over 25 lbs. (11 kg) in the product.
• Check your product for loose screws, worn parts, torn material or stitching on a
regular basis. Replace or repair parts as needed.
• Discontinue use of product should it malfunction or become damaged. Please
contact our customer service department at 1-800-328-7363 to arrange for repair
or obtain replacement parts.
IMPORTANT!
To ensure safe operation of your
product, please follow these instructions carefully. Please
keep these instructions for future reference.
IMPORTANT!
Before assembly and each use, inspect
this product for damaged hardware, loose joints, missing
parts or sharp edges. NEVER use if any parts are missing or
broken.
IMPORTANT!
Adult assembly is required.
FRAME ASSEMBLY
1) • To unfold, hold Lower Seat Frame while
gently pushing Front Base Frame in
opposite direction until it locks into place
(Fig. 1a).
• Push each end of the Backrest Frame
into the Lower Seat Frame while pushing
the Tabs inward (Fig. 1b). Be sure the
Tabs lock in place.
Note : It may be necessary to slide seat
fabric down while aligning the Backrest
Frame into position.
• Insert the ends of the Rear Base Frame
into the Front Base Frame while pushing
the Tabs inward (Fig. 1c). Be sure the
Tabs lock in place.
Fig. 1a
Fig. 1b
Fig. 1c
Backrest
Frame
Front Base
Frame
Lower Seat
Frame