Utility Stitches
72
g
Using the measurement on the quilting foot as a guide,
sew around the motif.
Finished project
h
After sewing is finished, slide the feed dog position
switch lever to
(to the right as seen from the rear
of the machine) and turn the handwheel to raise the
feed dogs.
i
Press
to turn the free motion mode off.
■
Satin stitching using the sewing speed
controller
A decorative stitch can be sewn by changing the stitch
width of a satin stitch. If the machine is set so that the
stitch width can be adjusted using the sewing speed
controller, the stitch width can quickly and easily be
adjusted.
a
Connect the foot controller.
b
Attach zigzag foot “J”.
c
Press
and set [Width Control] (page 1 of the
settings screen) to [ON].
The machine is now set so that the stitch width can
be controlled with the sewing speed controller.
d
Select a stitch.
• For details, refer to “Stitch Chart” on page 49.
e
While sewing, slide the sewing speed controller to
adjust the stitch width.
• Adjust the sewing speed with the foot controller.
f
When you are finished sewing, set [Width Control]
back to [OFF].
1
6.4 mm
(approx. 1/4
inch)
No.
1-33
Stitch
Memo
• Although the stitching results differ depending on
the type of fabric being sewn and the thickness of
the thread being used, for best results, adjust the
stitch length to between 0.3 and 0.5 mm (1/64 and
1/32 inch).
1
Narrower
2
Wider
b
a
