background image

USING THE MEMORY FUNCTION

C

h

ar

ac

te

r/D
ec

o

ra

tiv
e S

titc
he
s

119

4

USING THE MEMORY FUNCTION

Stitch Data Precautions

Observe the following precautions when using stitch 
data other than that created and saved in this machine.

Types of Stitch Data That Can Be Used

• Only .pmu stitch data files can be used with this 

machine. Using data other than that created 
using this machine may cause the machine to 
malfunction.

Computers and Operating Systems with the 
Following Specifications Can Be Used

• Compatible models:

IBM PC with a USB port as standard equipment
IBM PC-compatible computer equipped with a 
USB port as standard equipment

• Compatible operating systems:

Microsoft Windows 98SE/Me/2000/XP/Vista/7
(Windows 98SE requires a driver. Download the 
driver from our Web site (www.babylock.com). 
In addition, only Windows 98 Second Edition 
can use the driver.)

Precautions on Using the Computer to 
Create and Save Data

• If the file name of stitch data cannot be 

identified, for example, because the name 
contains special characters or symbols, the file is 
not displayed. If this occurs, change the name of 
the file. It is recommended to use the upper and 
lower case letters, the numbers 0 through 9, the 
dash “-”, and the underline “_”. Do not use 
comma “,” period “.” in the file name.

• Do not create folders in “Removable Disk” on a 

computer. If stitch data is stored in a folder, that 
stitch data cannot be displayed by the machine.

Trademarks

• IBM is a registered trademark or a trademark of 

International Business Machines Corporation.

• Microsoft and Windows are registered 

trademarks or trademarks of Microsoft 
Corporation.

Each company whose software title is mentioned in 
this manual has a software license agreement 
specific to its proprietary programs.
All other brands and product names mentioned in 
this manual are registered trademarks of their 
respective companies. However, the explanations 
for markings such as 

®

 and ™ are not clearly 

described within the text.

Saving Stitch Patterns in the 
Machine’s Memory 

You can save often-used stitch patterns in the machine’s 
memory. The machine's memory can hold up to a 
maximum of 24 stitch patterns, 70 entries per stitch 
pattern, or 224 KB.

a

Press .

Note

Do not turn off the machine while the “Saving” screen 
is displayed, otherwise you may lose the stitch pattern 
that you are saving. 

Memo

• It takes a few seconds to save a stitch pattern in the 

machine’s memory. 

• See page 122 for information on retrieving a saved 

stitch pattern.

Summary of Contents for Symphony BLSY

























































































































































Reviews: