Baby Lock Symphony BLSY Instruction And Reference Manual Download Page 112

Page: 112 / 152

EDITING STITCH PATTERNS

110

Selecting a Single/Repeating Pattern

Press

to select whether the pattern is sewn

repeatedly or once.

Changing the Thread Density
(Satin Stitch Patterns Only)

After selecting a stitch pattern, press

until the

desired stitching density is selected.

Memo

If you press

while sewing, the key changes to

and the machine will sew one copy of the

pattern, then automatically stop.

CAUTION

• If the stitches bunch when thread density is

changed to

, return the thread density to

. If you continue sewing when the stitches are

bunched, the needle may bend or break.

Memo

• Stitch patterns entered after the stitching density

was changed are added at the selected density until
it is changed again.

• You cannot change the stitching density of stitch

patterns once they have been combined.

Summary of Contents for Symphony BLSY

























































































































































Search results

Summary of Contents for Symphony BLSY

Reviews:

Related manuals for Symphony BLSY

Brands by name

Popular brands

Baby Lock Symphony BLSY, Instruction And Reference Manual

Search results

Summary of Contents for Symphony BLSY

Reviews:

Related manuals for Symphony BLSY

Brands by name

Popular brands