Baby Lock Symphony BLSY Instruction And Reference Manual Download Page 109

Page: 109 / 152

SEWING STITCH PATTERNS

r/D
ec

tiv
e S

titc
he
s

107

Press .

If the pattern is bunched together:

Press

in the FINE ADJUST VERTI. display.

Each press of the key increases the value and lengthens
the pattern.

If the pattern is stretched:

Press

in the FINE ADJUST VERTI. display.

Each press of the key decreases the value and shortens
the pattern.

If the pattern is skewed to the left:

Press

in the FINE ADJUST HORIZ. display.

Each press of the key increases the value and moves the
pattern to the right.

If the pattern is skewed to the right:

Press

in the FINE ADJUST HORIZ. display.

Each press of the key decreases the value and moves the
pattern to the left.

Sew the pattern again. If the pattern still is
not sewn correctly, adjust it again. Continue
making adjustments until the pattern is sewn
correctly.

After the pattern is sewn correctly, quit

making adjustments. Press

to return to

the previous screen.

Memo

You can sew with the settings screen on the display.

Note

The adjustment made will remain until changed again.

Summary of Contents for Symphony BLSY

























































































































































Search results

Summary of Contents for Symphony BLSY

Reviews:

Related manuals for Symphony BLSY

Brands by name

Popular brands

Baby Lock Symphony BLSY, Instruction And Reference Manual

Search results

Summary of Contents for Symphony BLSY

Reviews:

Related manuals for Symphony BLSY

Brands by name

Popular brands