background image

Note:

Before sewing a buttonhole on your project, practice on a scrap piece of the same

type of fabric.

BUTTONHOLE STITCHING

BUTTONHOLE STITCHING

1. Mark the position of the buttonholes on the

fabric.
The maximum buttonhole length is 3cm (1 3/16

inch). (Total of di thickness of button.)

2. Attach the buttonhole foot, then extend the

button guide plate and insert the button. The

size of the buttonhole is determined by the

button inserted in the button plate.
The upper thread should be passed through

the needle opening in the buttonhole foot, then

the thread placed under the foot as illustrated.

1

2

56

30 :

31:

32 :

33 :

34:

35:

36:

37:

38:

39:

For horizontal holes on blouses or shirts

made from thin or medium fabric.

For thin or medium fabric.

For thin or medium fabric.

For horizontal buttonholes on thick fabrics.

For suits or overcoats.

For jeans or trousers.

For thick coats.

For bound button holes.

For jeans or stretch fabric with a coarse

weave.

For stretch fabric.

RJ

Recommended

3.5~7.0

2.5~7.0

2.5~7.0

5.5~7.0

2.5~7.0

3.0~7.0

2.0~3.0

1.0~3.0

0.3~3.0

0.3~1.0

0.3~1.0

0.3~1.0

Making a one-step buttonhole

Summary of Contents for Quest PLUS BLQ2-PL









































































































Reviews: