1. Remove the presser foot holder, and attach
the free motion darning foot by positioning the
lever (a) behind the needle clamp screw (b).
Hold the free motion darning foot in place and
tighten screw (c).
2. Remove the presser foot holder, and attach
the free motion open toe darning foot by
positioning the pin (a) above the needle
clamp screw (b). Hold the free motion open
toe darning foot in place and tighten screw (c).
Move the drop feed lever to "
" to lower the
feed dogs.
b
a
b
a
a
b
b
a
c
b
c
a
RL
68
3.5~5.0
Free motion darning, embroidery and monogramming
RX
Note:
Free motion darning is accomplished
with the feed dog in the lowered position.
Movement of the fabric is controlled by the
operator; therefore it is necessary to coor-
dinate sewing speed and the movement of
fabric.
Darning
Place a piece of stabilizer under the fabric to be
mended.
First sew around the edges of the hole (to
secure the threads). Working from front to back,
sew over the hole in a constant and continuous
movement. Turn the fabric 1/4 turn and sew over
the first stitching moving the work slower over
the hole to separate the threads and not form
big gaps between the threads.
1
2
Summary of Contents for Quest PLUS BLQ2-PL
Page 1: ......
