Raise the presser foot. Remove the fabric, draw
the threads to the left side of the face cover and
cut using the thread cutter.
The threads are cut at the proper length to start
the next seam.
CUTTING THE THREAD
CUTTING THE THREAD
Attention:
Turn power switch to OFF. (
when replacing the needle !
"O")
Change the needle regularly, Abent or damaged
needle can cause skipped stitches, damage fabric,
and break while sewing.
To check the needle, place the flat side of the
needle on a flat surface. Discard any damaged
or bent needles.
Before changing the needle, use the handwheel
to raise the needle to its highest position.
A. Loosen the needle clamp screw and remove
the damaged needle.
B. With the flat side of the needle facing the back,
insert a new needle up as far as it will go.
C. Securely tighten the needle clamp screw.
REPLACING THE NEEDLE
REPLACING THE NEEDLE
31
Summary of Contents for Quest PLUS BLQ2-PL
Page 1: ......
