30
2. Specifying the Width of Satin Stitches
1
Press
or
beside
.
(The default setting is 2.0 mm when the application is started up.)
To select a narrower width, press
. To select a wider width,
press
.
Each press of
makes the width narrower by 0.5 mm.
Each press of
makes the width wider by 0.5 mm.
A setting between 1.0 mm and 3.0 mm in 0.5 mm units can be
specified.
Setting examples
1.0mm
2.0mm
3.0mm
3. Specifying the Sewing Direction of Fill
Stitches
1
Press
or
beside
.
(The default setting is
when the application is started up.)
Each press of
changes the setting in the following order:
→
→
. Press
to reverse the order of
.
Setting examples
Notes
•
If the size of the created pattern is larger than 10 cm
◊
10 cm, it is recommended
that
be set in order to prevent shrinkage.
