Sometimes called an overlock machine or overlocker, the serger is different from any conventional sewing
machine you have used. Awareness of its simple operation will enable you to become more proficient in
its use. Please read all instructions before using your new machine.
Serging is kind of a knitting process that loops two, three or four threads together to create a stitch.
Your Baby Lock Enlighten operates with one or two needles and one or two "loopers," each carrying a
thread to form the overlock stitch.
When fabric is placed into the machine, it reaches the feed dogs first. The feed dogs move the fabric along
as the cutting blades trim the edge, creating a clean edge to be finished. Then the loopers and needle(s)
form the stitch on the fabric edge, supported by one or more parallel "stitch fingers" - Metal prongs that
keep the fabric flat. The threads become "locked" over the fabric and the resulting stitches encase the raw
edge with thread to prevent fabric raveling.
After setting up your machine for the first time, take a few moments to learn how it sews. Before your serg-
er is threaded, turn the handwheel - toward you - and watch the movement and operation of the various
parts. Don't bother with fabric at first. It doesn't hurt your serger to stitch without fabric under the presser
foot.
O
V
E
V
I
E
W
4
How Your Serger Operates
Summary of Contents for Enlighten BLE3ATW-2
Page 1: ......
Page 56: ...EI 31 2 E BLE3ATW 2TA...
