![background image](http://html1.mh-extra.com/html/baby-lock/ellure-plus-blr2/ellure-plus-blr2_instruction-and-reference-manual_3329685093.webp)
Buttonhole Stitching/Button Sewing
91
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■
Changing the density of the stitching
Adjust the stitch length.
• For details, refer to “Adjusting the stitch
length” (page 57).
• If the fabric does not feed (for example, if it is
too thick), decrease the density of the
stitching.
■
Changing the stitch width
Adjust the stitch width.
• For details, refer to “Adjusting the stitch
width” (page 56).
Memo
z
Before sewing buttonholes, check the stitch
length and width by sewing a trial
buttonhole on a scrap piece of fabric.
■
Sewing buttonholes on stretch fabrics
When sewing buttonholes on stretch fabrics, use
a gimp thread.
a
Hook the gimp thread onto the part of
buttonhole foot “A” shown in the illustration.
b
It fits into the grooves, and then loosely tie it.
c
Attach buttonhole foot “A”.
• For details, refer to “Replacing the presser
foot” (page 42).
d
Select stitch
52
or
53
.
e
Adjust the stitch width to the thickness of the
gimp thread.
f
Lower the presser foot lever and the
buttonhole lever, and then start sewing.
g
When sewing is finished, gently pull the gimp
thread to remove any slack.
h
Use a handsewing needle to pull the gimp
thread to the wrong side of the fabric, and
then tie it.