![background image](http://html1.mh-extra.com/html/baby-lock/ellure-plus-blr2/ellure-plus-blr2_instruction-and-reference-manual_3329685013.webp)
Names of Machine Parts and Their Functions
11
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Needle and presser foot section
a
Buttonhole lever
The buttonhole lever is used with the one-step
buttonhole foot to create buttonholes.
b
Thread guide disk
Pass the thread through the thread guide disk when
using the needle threader to thread the needle.
c
Needle bar thread guide
Pass the upper thread through the needle bar thread
guide.
d
Needle plate
The needle plate is marked with guides to help sew
straight seams.
e
Needle plate cover
Remove the needle plate cover to clean the bobbin case
and race.
f
Bobbin cover
Open the bobbin cover to set the bobbin.
g
Feed dogs
The feed dogs feed the fabric in the sewing direction.
h
Presser foot
The presser foot applies pressure consistently on the
fabric as sewing takes place. Attach the appropriate
presser foot for the selected stitch.
i
Presser foot holder
The presser foot is attached onto the presser foot holder.
Right-side/rear view
a
Handle
Carry the sewing machine by its handle when
transporting the machine.
b
Handwheel
Turn the handwheel toward you to raise and lower the
needle. The handwheel should be turned towards you
(counterclockwise).
c
Embroidery card slot
Insert the embroidery card.
d
USB port connector
Plug the USB cable into the USB port connector.
e
Air vent
The air vent allows the air surrounding the motor to
circulate. Do not cover the air vent while the sewing
machine is being used.
f
Main power switch
Use the main power switch to turn the sewing machine
ON and OFF.
g
Foot controller jack
Insert the plug on the end of the foot controller cable
into the foot controller jack.
h
Power supply jack
Insert the plug on the power cord into the power supply
jack.
i
Feed dog position switch
Use the feed dog position switch to lower the feed dogs.
j
Presser foot pressure dial
Use the presser foot pressure dial to adjust the amount
of pressure that the presser foot applies.
k
Presser foot lever
Raise and lower the presser foot lever to raise and lower
the presser foot.
Memo
z
Refer to pages 10 through 13 while you are
learning to use your machine.