To install the Maxi Cosi car seat you will need the following
adapter part(s):
2
– Adapter Brackets (
1
– left,
1
– right)
1.
Remove the canopy and seat from stroller frame. Please refer to the
owner manual. (Be sure to store fabric and hardware for later use.)
2.
Secure
Right Adapter Bracket
to frame directly below the
folding mechanism making sure to align the notches in the
Adapter Bracket
over the snap and rivets. (Fig. A)
Repeat to the left side.(Fig. B)
Note:
Do not over tighten. Over tightening will damage the product
and void the warranty.
3.
Place car seat onto the
Adapter Brackets
, making sure the child
will be facing toward stroller handle. Firmly press down on the car
seat to lock into place. (Fig. C)
4.
Secure the car seat to stroller using
Safety Belt
. (Fig. D)
Note:
The red compression locks and support bars are not applicable
when using the Maxi Cosi car seat.
Maxi Cosi Car Seat
8