Baby Jogger city GO, Instructions Manual

Page: 19 / 56

19
Before installing base, make sure vehicle is
on level ground .
Place base on an approved vehicle seat
location .
1 Open the lock off .
2 Route the vehicle seat belt through the
rear-facing belt path (marked with labels)
and buckle . The seat belt should lay flat
and not twisted .
3 Check the level indicator on the base .
The bubble must be completely within
the zone of your childs weight . For infants
weighing 4-20 lb (2-9 kg) the bubble
must rest within the light blue line . For
children weighing 20-35 lb (9-16 kg) the
bubble must rest within the dark blue
line . Adjust the recline foot if needed .
BASE INSTALLATION - LAP BELT
1
2
3
4-20 lb (2-9 kg)
20-35 lb (9-16 kg)