Baby Jogger city GO, Instructions Manual

Page: 14 / 56

14
BASE INSTALLATION - LATCH
3 Press the LATCH connectors onto the
adjacent vehicle anchors until a click
is heard . Pull the LATCH connector to
verify a secure lock .
4 Check the level indicator on the base .
The bubble must be completely within
the zone of your childs weight . For infants
weighing 4-20 lb (2-9 kg) the bubble
must rest within the light blue line . For
children weighing 20-35 lb (9-16 kg) the
bubble must rest within the dark blue
line . Adjust the recline foot if needed .
5 While pressing the base down into the
seat, pull up on the LATCH adjuster strap
to tighten . To loosen the LATCH adjuster
strap, press button on latch buckle and
pull .
6 Test For Tightness . Grab the sides of the
base where the seat belt is and push and
pull the base from side to side and front
to back . If the base moves less than 1”
(2 . 5 cm), it is tight enough .
5
3
4
6
4-20 lb (2-9 kg)
20-35 lb (9-16 kg)