Baby Jogger city GO, Instructions Manual

Page: 16 / 56

16
Before installing base, make sure vehicle is
on level ground .
Place base on an approved vehicle seat
location .
1 Open the lock off .
2 Ensure the vehicle seat belt is not twisted
and route the vehicle belt through the
first belt path opening then under the
belt lock-off and down through the
second belt guide .
3 Check the level indicator on the base .
The bubble must be completely within
the zone of your childs weight . For infants
weighing 4-20 lb (2-9 kg) the bubble
must rest within the light blue line . For
children weighing 20-35 lb (9-16 kg) the
bubble must rest within the dark blue
line . Adjust the recline foot if needed .
BASE INSTALLATION - LAP/SHOULDER BELT
2
1
3
4-20 lb (2-9 kg)
20-35 lb (9-16 kg)