![background image](http://html1.mh-extra.com/html/baby-jogger/city-go-2-rapidlock/city-go-2-rapidlock_manual_3199423030.webp)
30
9 Test for tightness. Grab the sides of
the base where the seat belt is and
push and pull the base from side to
side and front to back.
If the base moves less than 1” (2.5
cm), it is tight enough.
10 Place car seat into the base. Push
down on the front of the car seat
and handle until you hear a “CLICK”.
Test to make sure the car seat is
attached by pulling up on the front
corners of car seat.
11 Check the level indicator on the base
.
The bubble must be completely
within the area of your childs weight
.
Check the level indicator with child in
the child restraint.
For infants weighing 4-20 lb (2-9 kg)
the bubble must rest within the clear
area
.
For children weighing 20-35 lb
(9-16 kg) the bubble must rest within
the notched area
.
To recline, review
page 21.
No te: If the foot is in the most raised
position and the bubble is out of the
area of your childs weight you can
place a tightly rolled towel or pool
noodle under the front end of the base
to achieve the proper recline
.
9
BASE INSTALLATION - LAP/SHOULDER BELT
4-20 lb (2-9 kg)
20-35 lb (9-16 kg)
10
CLICK!
11