7
• ALWAYS store the LATCH connectors when they are not being
used for installation
.
• NEVER place two LATCH connectors on one vehicle LATCH
anchor
.
• If installing carrier without base in vehicle, check the red level line
on the side of the child restraint to make sure that it is level with
the ground
.
• DO NOT allow children to play with or around this child restraint
.
• Always replace the child restraint and base after a crash of
any kind even if it was unoccupied
.
A crash can cause unseen
damage to the child restraint that may not be visible
.
• Do not modify your child restraint or base or use any accessories
or parts not supplied by the manufacturer of your child restraint
.
• The child restraint may become very hot if left in the sun or hot
areas
.
Always make sure to check the temperature of any metal
or plastic parts before placing your child in the child restraint
.
• NEVER use a second-hand child restraint or base that you do not
know its history
.
• DISCONTINUE USE of this child restraint after 7 years from the
manufacture date
.
The manufacture date can be found on the
underside of your child restraint
.
•
DO NOT use this child restraint unless
your child meets the following height and
weight criteria
.
Weight: 4-35 lb (2 - 16 kg)
Height: 32 in (81 cm) or less in height
Child’s head MUST be 1” (2
.
5 cm) or more
below the top of the seat as shown here
.
1" (2.5 cm)
